亚新app官网(中国)股份有限公司

PRODUCT

ENTERPRISE BRIEF INTRODUCTION

Commodity: Three Phase Anti-backcurrent Smart Power Meter

Model NO.: DTSD9866-CD4-NL

Application Scenarios: Used in photovoltaic power generation system to actively prevent or control the situation of reverse current when the power generation power is greater than the actual load.

Product Overview:

Using Din rail installation,especially suitable for applications with small installation space,industry standard wide temperature LCD screen,with Good high and low temperature display characteristics,to achieve full power measurement and display,including dynamic alarm,switching Input and output status,SOE event recording,complex rate,harmonics,Etc,support RS485 communication,can be configured to Modbus -RTU protocol.

Working Principle:

The Meter to be used with the inverter and the inverter adjusts the output power in real time through the power size and direction of the

network access port collected by the RS485 communication reading meter to achieve the anti-backflow function.

Key Feature:

Full power measurement & metering
DIN35 Rail Installation
High accuracy level
RS485 communication /ModBus RTU
Transformer input
Matching with inverter
All or More Functions Customizable

		Voltage	AC 57.7/100V, 220/380V
			Over load: 1.2 times rated Value(continuous):2 times rated value /1second
			Power consumption: <0.5VA(each channel)
		Current	AC 1.5(6)A, 100A/20mA, 200A/100m etc
			Over load：1.2 times rated value(continuous):10 times rated value/1second：
			Power consumption：<0.5VA(each channel):
Accuracy		Voltage, Current, Power	Grade:0.5
		Active Power	Grade 1
		Reactive Power	Grade 2
Wiring Type		Three phase three line,Three phase three line
Frequency		45-65Hz
Power Supply		Working range: AC/DC 85V～265V Power consumption: main body ≤5VA
Relay Output		Contact mode: normally open(level output) Contact capacity: AC 250V/3A DC 30N/3A
Power Pulse Output		Output mode：optocoupler pulse with open collector
Switch Value Input		Support dry contact input，inner DC12V power supply
Communication		RS485 interface, support Modbus-RU protocol
Security	Power Frequency withstand Voltage	Among APS, voltage signal, current signal:AC 2kW/lmin: Among switch value、pulse output、 Communication: AC 1KV/1min
	Insulation Resistance	input, output to chassis>10MQ
Electromagnetic compatibility level		Comply with IEC 61000 standard (grade 3)
Protection level		IP30
Working Environment		Temperature: -25℃~+70℃; Display Screen Temperature: -20℃~+70℃; Storage: -40℃~+85℃; Relative humidity: ≤95% no condensation; Elevation: ≤2500

DTSD9866-CD4-NL Three Phase Anti-backcurrent Smart Power Meter